Bolt Length Calculation: The Effect of “Grip Length” on Integrity

Bolt Length Calculation: The Effect of “Grip Length” on Integrity

The correct bolt length is determined by more than simply ensuring that the nut is fully threaded on. From a mechanical perspective, the key factor is the grip length, which is the distance between the bolt head and the nut, including flanges, seals, and washers.

The five-diameter rule (5D)

This rule states that the greater the grip length relative to the bolt diameter, the more stable the joint. Short, large-diameter bolts are extremely rigid. Any thermal shock causes a huge increase in stress in such a bolt, which can exceed the yield strength and lead to the flange joint opening up. By contrast, longer bolts, or bolts fitted with spring washers or spacer tubes, can absorb these stress peaks much more effectively.

Bolt protrusion beyond the nut

When designing the joint, it is also important to ensure that the bolt protrudes beyond the nut by at least 2 to 3 threads. This ensures that all the nut’s load-bearing threads are fully engaged. However, excessive protrusion can make disassembly more difficult due to corrosion or mechanical damage to the threads.

Are you ready to put your seal selection worries behind you? Contact us

and get valuable advice and information on industrial seals

Logo Pokorny Industries

Pokorny Industries Partnership in quality

All prices excluding VAT

© Pokorny industries s.r.o. 2026 - all rights reserved

Made by servisdesign