Inquiries
inquiries@pokornyindustries.comAccess to prices and online shopping
Overview of your purchased items
Contact your sales representative and clerk
Educational materials
News about industrial seals
Information on new products and services
Exclusive hints and tips
Fill in your contact details and we will get back to you as soon as possible.
We will call you at your chosen time and advise you on what you need.
Our sales and technical representative will come to your company for a personal consultation.
Tightening torque is not directly equivalent to clamping force. It is simply a means of achieving that force, and its effectiveness depends on the coefficient of friction (μ). In a standard dry joint, up to 90% of the applied tightening torque is used to overcome friction in the threads and under the nut. Only the remaining 10% is converted into useful tensile force in the bolt.
Using a high-quality lubricant or dry-film coating with a defined coefficient of friction can stabilize these losses, minimize variation in the applied force, and reduce the risk of thread seizure during assembly.
Changing the lubricant can dramatically affect the resulting coefficient of friction:
If the torque calculated for a dry bolt is applied to a bolt lubricated with a highly effective paste, the force achieved at the same torque can be up to twice as high. This can stretch or break the bolt, or crush the gasket.
Tightening torque must therefore be determined with the coefficient of friction of the lubricant used in mind.
© Pokorny industries s.r.o. 2026 - all rights reserved
Made by servisdesign
You don't know what to do?