Elastic deformation of a screw: The screw as a spring

Elastic deformation of a screw: The screw as a spring

In engineering practice, a bolt should be viewed not as a rigid rod, but as a very stiff spring. The function of a bolt in a flanged joint is to generate and maintain a clamping force that compresses the gasket. To generate this force, the bolt must be elastically stretched during assembly.

Why is bolt elasticity important?

Bolt elongation is essential for the joint to function properly. The longer the bolt—or, more precisely, the greater its elastic length—the better it can compensate for small changes in the system, such as gasket relaxation or thermal expansion of the flanges.

If the bolt is too short and stiff, even a minimal reduction in gasket thickness (by a few micrometers) can lead to a dramatic loss of preload.

Bolt elongation and Hooke’s law

In the elastic deformation range, bolt elongation is governed by Hooke’s law: ΔL = (F · L) / (E · A)

The importance of the bolt’s elastic length

Experience shows that the optimum grip length—the distance between the bolt head and the nut—should be at least five times the bolt diameter. If this distance is shorter, the joint becomes stiffer and more prone to loosening under thermal shocks.

Are you ready to put your seal selection worries behind you? Contact us

and get valuable advice and information on industrial seals

Logo Pokorny Industries

Pokorny Industries Partnership in quality

All prices excluding VAT

© Pokorny industries s.r.o. 2026 - all rights reserved

Made by servisdesign