Flange joint tightness in the context of generational change and knowledge sharing among fitters

Flange joint tightness in the context of generational change and knowledge sharing among fitters

35 years of experience in flange joint sealing

Pokorný industries s.r.o. has been active in the industrial gasket sector for 35 years and is the only company that has never sold asbestos gaskets.

Getting started in the era of “asbestos gaskets” was not easy for the company, but paradoxically, things became even harder after asbestos was banned. Installers’ established practices for fitting asbestos gaskets led us to create a specialist department and installation team that fitted the specified gasket and tightened it under controlled conditions. This was the only way we could demonstrate to our customers that the new gasket materials worked reliably.

Today, our Flange Management department takes a comprehensive approach to flange joint sealing.


Why was the EN 1591-4 standard created, and what does it offer installers?

When the EN 1591-4 standard for training installers of flange joints came into force in 2015, we were able to draw on our practical experience to establish a training centre. We provide training in accordance with EN 151-4, Table 1 – Basic Qualification and Table 11 – Responsible Technician.

More than 800 participants from over 60 companies have completed our training to date.

Training installers is not just about the cross-tightening sequence. It is a comprehensive set of theoretical and practical information that builds on installers’ hands-on experience.

Scope of the EN 1591-4 standard:

Objective

The standard’s Basic Qualification covers 27 topics, which can be divided into 4 areas:

The certificate is valid for 5 years, subject to certain conditions specified in the standard.


Old installation habits versus today’s sealing materials

The fact is that nearly 95 % of the installers who attend our training tighten joints “by feel” in their work (they are not given a specified tightening torque for the installation).

That is why, going beyond the requirements of the standard, we have included training on tightening to achieve a specified gasket deformation as a check after tightening “by feel”.

More and more young people are attending the training and starting to take over from their predecessors. However, participants’ reactions during the training show us that some “habits” from the days of asbestos gasket installation persist—or are passed down.

Asbestos gaskets were easy to install: it was enough to tighten the bolts as hard as possible and grease the gasket with petroleum jelly so it would stay on the mating surface. The use of washers under the nuts and lubrication of the bolts were often not considered at all.

It would be a mistake to keep repeating the same flange-joint installation practices “from the days of asbestos gaskets” and applying them to today’s sealing materials. The sealing materials used today inherently require a different approach to installation. A flange joint must be viewed as a single assembly of interdependent components: the flange, the gasket and the bolts. These components should be used in balance with one another.

This prompts us to consider how we can change the situation and help companies, their maintenance staff and installers put systems and procedures in place for installations that ensure flange joints remain sealed reliably and safely over the long term.


Practical tools for improving flange-joint reliability

In addition to the installer training mentioned above, we have prepared an e-book, along with related technical articles and case studies that explore flange-joint sealing from many different perspectives.

The e-book covers the steps and considerations involved in ensuring long-term, reliable flange-joint sealing

Together with the installer training and technical articles mentioned above, we would like to share some of our practical experience with you and work together to improve the in-service reliability of your flange joints.

We can help you establish a long-term, reliable flange-joint installation process by checking gasket deformation when tightening “by feel”, using the correct lubricant for bolted joints and gaskets with optimised dimensions.

Download the free e-book HERE.

Are you ready to put your seal selection worries behind you? Contact us

and get valuable advice and information on industrial seals

Logo Pokorny Industries

Pokorny Industries Partnership in quality

All prices excluding VAT

© Pokorny industries s.r.o. 2026 - all rights reserved

Made by servisdesign