Food-grade seals: standards, materials, and what to ask your supplier

Which seals are suitable for food contact? EC 1935/2004 and FDA requirements, suitable materials, resistance to CIP/SIP sanitation, and detectable compounds.

Food-grade seals: standards, materials, and what to ask your supplier

In food production, a seal is more than just a technical component—it can become a contaminant in direct contact with the product. The wrong choice can release substances into food, harbor microorganisms in microcracks, or break apart into a batch.

What does “food-grade certification” mean?

Regulation (EC) 1935/2004 – the European framework for materials in contact with food: materials must not release substances that could endanger health or alter the composition or taste of food. Plastics are covered in more detail by Regulation (EU) 10/2011.

FDA (CFR 21) – a US standard that European buyers often require alongside EU compliance; for rubber, typically §177.2600.

Ask for a declaration of compliance for the specific compound and batch—not a claim that “silicone is food-grade.” Certification applies to the compound, not the polymer.

Materials for food contact

MaterialTemperatureStrengthsWatch out for
VMQ silicone−60 to 200 °Cversatile, organoleptically neutralabrasion, fats at high temperatures
EPDM−50 to 130 °Chot water, steam, CIP solutionsfats and oils
PTFE−268 to 260 °Cchemicals, sanitation, zero water absorptioncold flow
NBR−30 to 120 °Cfats, oils (dairy industry)hot CIP, steam

CIP/SIP sanitation: the hidden seal killer

Cleaning destroys seals more often than the product does: hot acidic and alkaline solutions (CIP), and steam sterilization (SIP). Choose materials based on the combination of product + cleaning chemicals + temperature, not just the food. A common mistake: NBR performs very well with milk fat in a dairy, but breaks down because of the caustic CIP solution. Check resistance in the chemical resistance database.

Detectable materials

Compounds with metal filler can be detected by metal detectors and X-ray systems—if a piece of seal breaks off, the production line finds it, not the customer.

Hygienic design: it’s not just about the material

Four questions to ask your supplier

  1. Do you have a declaration of compliance with 1935/2004 (and, where applicable, FDA) for this specific compound?
  2. What temperatures and chemicals can the material withstand during CIP/SIP?
  3. Do you offer a detectable version?
  4. How do you document batch traceability?

For the food industry, we supply certified flat gaskets, O-rings, profiles, and silicone materials – with documentation for audits.

Discuss seals for the food industry →

Which seals can be used in contact with food?

Materials certified under (EC) 1935/2004 – typically silicone, EPDM, PTFE, or NBR in a certified compound. The key is a declaration of compliance for the specific compound.

What is an FDA-compliant seal?

A seal made from a compound that complies with FDA regulations (CFR 21). In Europe, compliance is often required alongside EC 1935/2004.

Why do seals fail sooner than they should?

Because of sanitation—hot CIP solutions and steam are more aggressive than food. Choose materials based on the cleaning chemicals as well.

What are detectable seals?

Compounds detectable by metal detectors and X-ray systems—a production line inspection will catch any fragments.

Are you ready to put your seal selection worries behind you? Contact us

and get valuable advice and information on industrial seals

Logo Pokorny Industries

Pokorny Industries Partnership in quality

All prices excluding VAT

© Pokorny industries s.r.o. 2026 - all rights reserved

Made by servisdesign