Graphite Gaskets: Where They Excel and What to Watch Out For

Graphite withstands steam, thermal cycling, and imperfect flanges—and doesn’t age. What oxidation is, what TGA analysis involves, and how to choose reinforcement.

Graphite Gaskets: Where They Excel and What to Watch Out For

Graphite gaskets are among the most versatile sealing materials: they operate from −200 to +450 °C in oxidizing atmospheres and outperform even asbestos-based Klingerit across a wider range of operating conditions. Graphite also does not age. But graphite gaskets vary enormously in quality, and you can’t tell the difference by eye. Purity is what matters.

Where graphite is the first choice

Types by reinforcement

Expanded graphite on its own is soft and delicate to handle. That’s why the sheets are reinforced:

TypeReinforcementApplication
POWERgraf 30.1 mm perforated sheet (AISI 316)Medium and higher pressures, all-purpose
POWERgraf 40.05 mm bonded-in foil (AISI 316)Low and medium pressures
POWERgraf 5Expanded metal sheet (AISI 316L)Large pressure fluctuations
POWERgraf HPMultilayer, adhesive-freeHigher pressures and temperatures
POWERgraf 60.01 mm polymer foilValves, pumps, flanged pipe joints, heat exchangers, compressors

The PREMIUM and ECONOMY ranges differ in graphite purity and temperature limit (450 vs. 400 °C). And purity is exactly what we need to focus on.

Oxidation: the factor that determines service life

Oxidation—the loss of material caused by temperature and oxygen—reduces bolt stress and the contact pressure on the gasket. The result is always the same: a leaking joint.

Oxidation resistance depends on the purity of the deposit from which the graphite is sourced. The more chlorides, fluorides and sulphur it contains, the faster it oxidizes. Worse still, these impurities cause pitting corrosion of the sealing surfaces—a poor-quality gasket can damage the flange itself (repair = flange resurfacing).

TGA analysis: how purity is measured

Thermogravimetric analysis measures weight loss: a 2–3 g sample is dried for one hour at 100 °C, then kept at 670 °C for two hours in an airflow of 7 l/min. Oxidation is calculated from the residual weight.

The greater the weight loss, the poorer the graphite. Materials with oxidation levels of 80–99% are also sold on the Czech and Slovak market. Ask your supplier for the TGA analysis results. A reputable manufacturer will have them and provide evidence.

What to watch out for during installation

  1. Brittleness – do not fold or stretch it over edges.
  2. Calculated contact pressure – graphite is forgiving, but you should still calculate the torque (torque calculation).
  3. Oxidizing conditions near the upper temperature limit – lower the limit when operating in air.
  4. Impurities in low-cost graphite – risk of pitting corrosion on flanges.

We supply POWERgraf graphite sheets and die-cut gaskets with documented purity—including torque calculations and installation with a guarantee.

Request a quote for graphite gaskets →


FAQ

What temperature can a graphite gasket withstand?

In air, 400–450 °C depending on purity; higher in steam and inert atmospheres.

What is TGA analysis of graphite?

An oxidation test that measures weight loss at 670 °C in an airflow. The lower the weight loss, the higher the graphite quality.

Why are graphite gaskets reinforced with metal?

Pure expanded graphite is soft; reinforcement provides strength during handling, installation and under pressure.

Can a gasket damage a flange?

Yes—chlorides, fluorides and sulphur in poor-quality graphite cause pitting corrosion of the surfaces.

Are you ready to put your seal selection worries behind you? Contact us

and get valuable advice and information on industrial seals

Logo Pokorny Industries

Pokorny Industries Partnership in quality

All prices excluding VAT

© Pokorny industries s.r.o. 2026 - all rights reserved

Made by servisdesign