High-Temperature Bolt Materials: From 25CrMo4 to Inconel

High-Temperature Bolt Materials: From 25CrMo4 to Inconel

Selecting the bolt material for high-temperature flanges is just as important as selecting the gasket. Ordinary carbon steel loses its strength at temperatures above 250 °C. For higher temperatures, the steel must be alloyed with elements such as chromium, molybdenum and vanadium.

High-temperature bolt materials

  1. 25CrMo4 (1.7218) – standard for temperatures up to approx. 450 °C. Good toughness and creep resistance.
  2. 21CrMoV5-7 (1.7709) – vanadium-alloyed steel designed for the energy industry (steam pipelines) at temperatures up to 550 °C.
  3. Stainless steels (A2, A4) – corrosion-resistant, but have a high coefficient of thermal expansion and a low yield strength. They are not ideal for high-pressure, high-temperature joints.
  4. Inconel 718 / Nimonic – nickel-based superalloys used in extreme applications (above 600 °C) and aerospace. They retain their elasticity even at temperatures that ordinary steel bolts could not withstand.

The importance of checking inspection certificates

When selecting a material, it is also essential to check the inspection certificates in accordance with EN 10204. Substituting materials without a thorough understanding of them can have fatal consequences, as each of these materials has a different modulus of elasticity and requires a different preload calculation.

Are you ready to put your seal selection worries behind you? Contact us

and get valuable advice and information on industrial seals

Logo Pokorny Industries

Pokorny Industries Partnership in quality

All prices excluding VAT

© Pokorny industries s.r.o. 2026 - all rights reserved

Made by servisdesign