Live Loading: The Principle and Benefits of Using Disc Springs

Live Loading: The Principle and Benefits of Using Disc Springs

A bolted joint gradually loosens mainly as a result of frequent thermal cycles, due to gasket relaxation and material shrinkage. A disc spring system is a mechanical solution that adds flexibility to the joint using these spring washers.

How does Live Loading work?

The springs are installed under the bolt nut and sized so that they are compressed to approximately 80% of their travel during installation. If the gasket thickness decreases by a few micrometres during operation, the disc spring expands slightly and “pushes” the nut. This keeps the clamping force within safe limits and ensures constant pressure on the gasket without causing the flanged joint to expand.

Benefits of Live Loading

Correct sizing of disc springs

A disc spring is not merely a “washer” but a precisely calculated engineering component. The spring stiffness must be matched to the stiffness of the bolts and gasket.

Are you ready to put your seal selection worries behind you? Contact us

and get valuable advice and information on industrial seals

Logo Pokorny Industries

Pokorny Industries Partnership in quality

All prices excluding VAT

© Pokorny industries s.r.o. 2026 - all rights reserved

Made by servisdesign