NBR vs. EPDM vs. FKM: how to choose the right rubber for a seal

Two black rubber materials look identical. One seals in oil for years, while the other swells and fails. A comparison of NBR, EPDM, FKM, and silicone—and the most common mix-ups.

NBR vs. EPDM vs. FKM: how to choose the right rubber for a seal

Place NBR and EPDM sheets side by side: two identical black rubbers. One seals in oil for years; the other swells and fails. Mixing up rubber types is the most common material-selection mistake we see in industrial operations—and one table can help prevent it.

Comparing common rubber types

RubberTemperatureStrengthsWeaknesses
NBR−30 to 120 °Cmineral oils, greases, fuelsozone, UV, steam
EPDM−50 to 130 °Chot water, steam, UV, weatheringmineral oils and greases
FKM/FPM (Viton®)−20 to 200 °Cchemicals, oils, high temperatureshot water/steam, price
VMQ (silicone)−60 to 200 °Cwide temperature range, food useabrasion, tear resistance
CR (neoprene)−20 to 100 °Cweathering, refrigerationlimited range of applications
SBR−30 to 100 °Cprice, general-purpose useoils, chemicals, ageing
NR (natural rubber)−40 to 85 °Celasticity, abrasion resistanceoils, ozone

The values reflect our range of rubber rolls and sheets; check the product data sheet for the specific compound.

Quick decision guide

The most common mix-ups and their consequences

EPDM in oil – the rubber swells and softens, and the joint starts leaking. A typical scenario: “we replaced the seal with another one that was the same color.”

NBR in steam or outdoors – the rubber hardens and cracks. NBR has no place in sunlight or hot water.

Silicone in a dynamic application – low abrasion resistance means a short service life.

FKM in hot water – excellent chemical resistance does not mean resistance to steam.

How to identify rubber when the label is missing

Only reliably through laboratory testing. In practice, don’t try to identify it—specify it: buy rubber with a material data sheet and clear identification markings.

Rubber is only half the answer

The same rules apply to O-rings, oil seals, and the elastomers used in mechanical seals. The wrong elastomer can cause even a correctly designed joint to fail. We can help you choose—including by checking the material against our chemical resistance database.

Get advice on material selection →

What is the difference between NBR and EPDM?

NBR resists oils and fuels, but not UV or steam. EPDM is exactly the opposite.

What do FKM and FPM mean?

They refer to the same group of fluoroelastomers (trade name Viton®). FKM is used under ASTM, and FPM under ISO/DIN.

Which rubber should I use for drinking water and food?

Silicone (VMQ) or certified-grade EPDM – see Food-grade seals.

How can I tell NBR from EPDM?

You can’t tell them apart visually. Only laboratory testing is reliable—so always ask for a material data sheet.

Are you ready to put your seal selection worries behind you? Contact us

and get valuable advice and information on industrial seals

Logo Pokorny Industries

Pokorny Industries Partnership in quality

All prices excluding VAT

© Pokorny industries s.r.o. 2026 - all rights reserved

Made by servisdesign