PTFE (Teflon) seals: properties, limitations, and when not to use them

PTFE withstands temperatures from −268 to 260 °C and almost any chemical. It has one weakness: cold flow. When to use PTFE, when not to, and how to choose the right type.

PTFE (Teflon) seals: properties, limitations, and when not to use them

PTFE is a unique material: it works from −268 to +260 °C, resists virtually all chemicals, does not age, and meets food-grade and pharmaceutical standards. Yet it can fail in a joint because of a single property: cold flow.

Why PTFE is the first choice in chemical applications

PTFE’s chemical resistance is unmatched among sealing materials: acids, alkalis, solvents, oxidizing agents. There are very few exceptions (molten alkali metals, elemental fluorine at high temperatures). Check the specific medium in our chemical resistance database – for most substances, PTFE is in the “excellent” column.

On top of that, it has zero water absorption, is physiologically inert (FDA, EC 1935/2004 for the relevant grades), and works across a range from cryogenic temperatures to hot chemical applications.

The weakness: cold flow

Under constant pressure, unfilled PTFE slowly flows sideways – even at room temperature. In a joint, this means a gradual loss of preload: it seals after installation, then loosens after a few weeks. The higher the temperature and pressure, the faster this happens.

The solution is not to “tighten it more” – that will accelerate the cold flow. The solution is to choose the right material grade:

PTFE types and when to use each

TypeWhat it addressesOur range
Filled PTFE (glass, silicates, microspheres)Fillers significantly reduce cold flowPOWERflon 10 / 20 / 30
Expanded PTFE (ePTFE)Minimal creep; conforms to less-than-perfect flangesPOWERflon BG-S
Virgin PTFEMaximum purity; for lower loads onlyPOWERflon 30 White
Envelope gasketsA historic solution – why to be cautious–
PTFE tapes and cordsThreaded jointsthread sealants

POWERflon grades work from −268 to +260 °C and are rated for up to 40 bar as standard (BG-S can be supplied for non-standard applications up to 200 bar).

Installation guidelines

  1. Calculate the torque for the specific PTFE grade – filled, expanded, and virgin PTFE have very different allowable pressures. There is no such thing as a standard “torque for Teflon.” → torque calculation
  2. Retighten after 24 hours or as specified – to compensate for initial cold flow.
  3. For temperature cycles, consider Live Loading (disc springs).
  4. Use ePTFE on less-than-perfect flanges, not a hard filled grade.

When not to use PTFE


Send us the medium, temperature, pressure, and joint dimensions. We’ll recommend a specific PTFE grade and calculate the installation torque.

Discuss PTFE gaskets →

What is the difference between PTFE and Teflon?

None – Teflon® is a trade name for PTFE.

What temperature can PTFE withstand?

−268 to +260 °C. Fillers and joint loading may lower the upper limit.

What is cold flow?

Slow, permanent deformation under pressure that leads to loss of preload and leakage. Fillers and an expanded structure (ePTFE) help reduce it.

Is PTFE suitable for food applications?

Yes, the relevant grades comply with FDA and EC 1935/2004 – see Food-grade gaskets.

Are you ready to put your seal selection worries behind you? Contact us

and get valuable advice and information on industrial seals

Logo Pokorny Industries

Pokorny Industries Partnership in quality

All prices excluding VAT

© Pokorny industries s.r.o. 2026 - all rights reserved

Made by servisdesign