Retightening a Bolted Joint While Hot (Hot Retorquing)

Retightening a Bolted Joint While Hot (Hot Retorquing)

Due to gasket creep, preload may decrease by 20–40% during the first 24 hours of operation at elevated temperatures.

When to retorque at operating temperature

Retorquing should only be performed at operating temperature (usually during warm-up to 100–150 °C) and WITH NO PRESSURE in the pipeline, or, for safety reasons, at the minimum process overpressure.

Limitations on retorquing at operating temperature

Retorquing must not be performed on elastomeric or expanded graphite gaskets after prolonged service at high temperatures, when the material has already become brittle. There is a risk of the material breaking down and causing an immediate failure.

Retorquing after reaching operating temperature must always be assessed in relation to the specific application.

Are you ready to put your seal selection worries behind you? Contact us

and get valuable advice and information on industrial seals

Logo Pokorny Industries

Pokorny Industries Partnership in quality

All prices excluding VAT

© Pokorny industries s.r.o. 2026 - all rights reserved

Made by servisdesign