Access to prices and online shopping
Overview of your purchased items
Contact your sales representative and clerk
Educational materials
News about industrial seals
Information on new products and services
Exclusive hints and tips
Submersible sewage pumps VT from the manufacturer SACI Pumps are designed for pumping sewage, wastewater, and heavily contaminated water, including liquids containing sludge and solid particles. They utilize a vortex impeller and a cast iron GG25 construction. Individual models achieve a maximum flow rate of 432 m³/h and a head of up to 35 m.
These values are approximate and may be influenced by other factors. We will be happy to consult with our expert to make sure you make the right choice.
Flow rate up to 115 m³/h, head up to 12 m, motor 1,1–3 kW. Vortex impeller, GG25 cast iron, AISI 420 shaft. DN 80, 4-pole motor 1 450 rpm. IP 68.
Flow rate up to 210 m³/h, head up to 23 m, motor 2,2–25 kW. Vortex impeller, GG25 cast iron, AISI 420 shaft. DN 100, 4-pole motor, 1 450 rpm. IP 68.
Flow rate up to 432 m³/h, head up to 35 m, motor 35–55 kW. Vortex impeller, GG25 cast iron, AISI 420 shaft. DN 150, 4-pole motor, 1 450 rpm. IP 68.
The VT pumps utilize a centrifugal design with a vortex impeller made of GG25 cast iron. The pump body and main structural components are also made from the same material, while the shaft is made of AISI 420 stainless steel. The vortex impeller allows for the pumping of liquids containing solid particles and sludge, with the maximum permissible size depending on the specific design.
The design includes two mechanical seals that ensure separation of the pumped liquid from the electric motor space. The pumps are equipped with a conductivity probe for detecting liquid ingress and thermal protection for the electric motor. The four-pole asynchronous motors operate at a rated speed of 1,450 rpm and have an IP68 rating.
The VT series is designed for liquids with a temperature of up to 40 °C and allows for submerged operation at a maximum depth of 20 m. The pumps are particularly used in wastewater treatment plants, sewage pumping stations, and industrial operations. Depending on the specific design and accessories used, the pumps can be installed permanently or used as portable units.
The VT series includes four-pole designs with discharge connections DN 80, DN 100, and DN 150. The individual product groups differ in motor power, hydraulic parameters, and solid particle passage.
The specific model must be chosen based on the desired operating point, properties of the pumped liquid, and installation conditions.
VT pumps are designed for pumping sewage and wastewater, including liquids containing sludge and solid particles. The vortex impeller allows these impurities to pass through the pump. The maximum allowable size of solid particles depends on the specific model.
VT pumps allow for fixed installation using a connection base or portable use with the appropriate discharge connection. The installation method depends on the specific design of the pump and the operating conditions.
VT pumps are designed for liquids with a temperature of up to 40 °C. The maximum immersion depth is 20 m, and the electric motors have an IP68 protection rating.
© Pokorny industries s.r.o. 2026 - all rights reserved
Made by servisdesign
You don't know what to do?
