Access to prices and online shopping
Overview of your purchased items
Contact your sales representative and clerk
Educational materials
News about industrial seals
Information on new products and services
Exclusive hints and tips
Metal and semi-metal gaskets for high pressures and temperatures. RTJ rings, comb gaskets, wrapped, lens, and corrugated gaskets with graphite or PTFE.
These values are approximate and may be influenced by other factors. We will be happy to consult with our expert to make sure you make the right choice.
The metal sealing rings are designed for high pressures and temperatures - they can seal joints with pressures up to 1500 bar and temperatures up to 1000 °C.
Metal core seal combined with a soft sealing layer of graphite or PTFE. For use in high pressure and heat stressed flange joints.
It solves the problems caused by insufficient elasticity of the seal. Also suitable for applications with low initial tightening torque.
It solves the problems caused by insufficient elasticity of seals and prevents the leakage of pollutants into the environment. Suitable where cooling and re-heating of the flange occurs.
Metallic coated gaskets are produced in various combinations of metallic and non-metallic materials. Use in a wide range of industrial applications.
Due to its spherical shape and relatively small sealing area, the seal achieves a high specific pressure during installation and thus very good sealing properties.
Metal and semi-metal gaskets are the choice for flange joints where standard soft gaskets are insufficient – especially under high pressures, temperatures, or aggressive media. They combine the strength of a metal core with the adaptability of a soft sealing layer made of graphite, PTFE, or mica. The result is a gasket that withstands cyclic pressure and temperature changes, compensates for uneven flange compression, and in the case of corrugated gaskets, allows for the reuse of the metal core after replacing the sealing layer.
We will help you choose the right type of gasket for your pressure, temperature, and flange type.
Type R (oval or octagonal) is the standard RTJ ring according to API 6A and ANSI B16.20 – both profiles are interchangeable in modern flanges. Type RX utilizes the increase in internal medium pressure to enhance sealing efficiency and is interchangeable with type R. Type BX is designed for the most demanding high-pressure applications up to 1,380 bar (20,000 psi) – with proper installation, the flanges contact at both the inner and outer diameters, eliminating the risk of leakage.
To avoid damaging the groove in the flange, the material of the ring should be approximately 30 Brinells softer than the flange material. With the correct hardness difference, sufficient plastic deformation of the ring occurs, ensuring sealing without wearing out the groove. Material selection depends on chemical compatibility with the medium and the flange material – we offer a wide range of materials for various combinations.
Camprofile gaskets are advantageous where high demands for repeated disassembly and assembly are placed – the metal core can be reused after replacing the sealing layer, reducing operational costs. They better compensate for uneven flange compression and installation errors. Spiral wound gaskets, on the other hand, are more suitable for standard flange joints with regular replacement. If you are unsure, we can advise you.
Yes. We manufacture camprofile gaskets, DynaGraph, and wrapped gaskets in non-standard dimensions and with partitions according to customer drawings – typically for heat exchangers and special industrial equipment. RTJ rings and lens gaskets are supplied according to API, ANSI, or industry standards. Contact us with your drawing or specification.
© Pokorny industries s.r.o. 2026 - all rights reserved
Made by servisdesign
You don't know what to do?
